From astrobites: “A Pulsar’s Surface Map Gets a NICER Update”

Astrobites bloc

From astrobites

Dec 30, 2019
Kaitlyn Shin
Title: A NICER View of PSR J0030+0451: Millisecond Pulsar Parameter Estimation
Authors: Thomas E. Riley, Anna L. Watts, Slavko Bogdanov, et al.
First Author’s Institution: Anton Pannekoek Institute for Astronomy, University of Amsterdam, Science Park 904, 1090GE Amsterdam, The Netherlands
1
Status: Appears in an ApJ Letters Focus Issue on NICER Constraints on the Dense Matter Equation of State [open access on the arXiv]

NASA/NICER on the ISS

Women in STEM – Dame Susan Jocelyn Bell Burnell

Dame Susan Jocelyn Bell Burnell, discovered pulsars with radio astronomy. Jocelyn Bell at the Mullard Radio Astronomy Observatory, Cambridge University, taken for the Daily Herald newspaper in 1968. Denied the Nobel.

Dame Susan Jocelyn Bell Burnell at work on first plusar chart 1967 pictured working at the Four Acre Array in 1967. Image courtesy of Mullard Radio Astronomy Observatory.

Dame Susan Jocelyn Bell Burnell 2009

Dame Susan Jocelyn Bell Burnell (1943 – ), still working from http://www. famousirishscientists.weebly.com

What do pulsars’ magnetic fields look like?
Pulsars are rapidly rotating neutron stars with short and regular rotational periods, observed via their beams of electromagnetic radiation. These observed pulses are analogous to the light flashing on a lighthouse where observers can only see the light pulses once every rotation, when the beams are aligned along the line of sight. For rotation-powered pulsars, these light pulses are powered by the neutron stars’ rapid rotations and extremely strong magnetic fields; the canonical (standard) depiction of the magnetic fields that give rise to these pulses can be seen below in Figure 1.

2
Figure 1. A textbook view of the magnetic field configuration around a pulsar, where the large-scale external magnetic field has a dipole configuration centered at the neutron star. The magnetic axis is not aligned with the rotation axis and thus electromagnetic beams (in this figure, radio beams) can be observed as pulses with regular rotational periods. The light cylinder, outlined in dashed green, is the radius out to which the co-rotation speed of the magnetic field approaches the speed of light. Credits: Handbook of Pulsar Astronomy by Duncan Ross Lorimer and Michael Kramer (https://www.cv.nrao.edu/course/astr534/Pulsars.html)

This “textbook view” of a pulsar’s magnetic field depends largely upon the simplifying assumption that the large-scale external magnetic field has a dipole configuration centered at the neutron star. Many of these dipole configuration models give rise to heated spots on the neutron star, where the hot regions are located on opposite poles; X-rays are emitted from these hot regions as the pulsar rotates. However, these dipole models are far from comprehensive, and understanding the mechanisms of pulsar emission is still an active area of research. Indeed, there is observational evidence for higher-order multipole moments (e.g. quadrupoles, octupoles, etc) present near the surface of neutron stars. However, the combination of limited computational power (required for numerically simulating these more complex magnetic fields), and no obvious choice of which alternate magnetic field configurations would better explain observed pulsar emission, makes it difficult to study models more complex than the dipole models.

A NICER development
The Neutron star Interior Composition ExploreR (NICER) is a NASA telescope installed aboard the International Space Station in 2017. With its high time resolution and unprecedented sensitivity in the soft X-ray band (0.2–12 keV), NICER has obtained some of the highest-quality pulse profiles (shape of observed pulses) of known X-ray pulsars. Today’s paper focuses on NICER data of one such pulsar, PSR J0030+0451. This pulsar is an isolated pulsar as well as a millisecond pulsar (since its rotation period is ~4.87 ms). It is one of the nearest observed millisecond pulsars, with a relatively well-constrained distance of 329 ± 9 parsecs (about 1070 ± 30 light years) away from Earth.

In this paper, the authors investigated models that would best explain the observed pulse profile of PSR J0030+0451. Since two distinctly occurring pulse components were observed, the tested models included two distinct hot regions on the surface of the neutron star, with shapes such as circular spots, ring-shaped regions, and crescents. Also tested was the standard configuration of identical hot regions on opposite poles of the neutron star, as well as more complex configurations where the two hot regions were independent and didn’t have to be located at opposite poles. The propagation of the radiation toward the observer (reconstructing the emission from the hot regions) and the instrumental response (the sensitivity of the instrument) were also included in the models.

Multiple methods were used to determine which physical configuration was optimal, including (but not limited to) evaluating the model evidence (also known as the marginal likelihood), i.e. how well the model answers the question “given a model, how likely is it that the observed data could have come from this model?” After exploring various different models, the authors found that the physical configuration which seemed to best explain the observed data had hot regions modeled as a small circular spot and an extended thin crescent, both located in the same hemisphere of PSR J0030+0451 (Figure 2).

3
Figure 2. A view of the inferred hot regions on the surface of PSR J0030+0451, aligned with the equator and viewed at three different positions in the rotation. In this model, the inferred hot regions are the small circular spot and the extended thin crescent, and they have approximately the same effective temperature. (Figure 17 in today’s paper.)

Today’s study found that the canonical “textbook view” of pulsar magnetic field configurations, where the resulting hot regions are located on opposite poles of the neutron star, was a strongly disfavored model for PSR J0030+0451. A comparison between hot regions from a canonical magnetic field configuration (using gamma-ray and radio pulses), and from the optimal configuration found in today’s paper, can be seen in Figure 3. This extraordinary finding—where the configuration of the pulsar’s hot regions is much more complex than standard models predict—agrees with another independent study of NICER data of PSR J0030+0451, which found a strikingly similar result. For an animated visualization of the inferred hot regions from both studies, check out the embedded video below provided by NASA!

4
Figure 3. Another visualization of the hot regions from PSR J0030+0451. The color blue depicts hot regions at opposite poles of the neutron star inferred from a previous study (Johnson et al. 2014), whereas the color red depicts hot regions in the same hemisphere inferred from today’s paper. (Figure 2 in Bilous et al. 2019, an accompanying paper to today’s paper.)


Video 1. A surface map of pulsar J0030+0451 using X-ray data from NICER. The inferred locations and shapes of the hot regions on the neutron star surface can be found at 2:45. Credits: NASA Goddard (https://youtu.be/zukBXehGHas)

Astrophysical implications

The strange configuration of hot regions on a pulsar would have to have been created by a strange magnetic field configuration. Such a complex magnetic field configuration would have implications for studying pulsar emission mechanisms, such as perhaps modifying the interpretation of multi-wavelength emission from pulsars. Additionally, with the optimal model from today’s paper, the authors are able to provide an estimate of the mass and radius of the neutron star of PSR J0030+0451 (approximately 1.34 +0.15/-0.16 solar masses and 12.71 +1.14/-1.19 km, respectively). Constraints on the mass and radius of a neutron star are invaluable for studying its internal composition and the dense matter equation of state, which is a long-enduring astrophysical mystery. With the NICER mission, it is possible that the dense matter equation of state can finally be understood!

See the full article here .


five-ways-keep-your-child-safe-school-shootings

Please help promote STEM in your local schools.

Stem Education Coalition

What do we do?

Astrobites is a daily astrophysical literature journal written by graduate students in astronomy. Our goal is to present one interesting paper per day in a brief format that is accessible to undergraduate students in the physical sciences who are interested in active research.
Why read Astrobites?

Reading a technical paper from an unfamiliar subfield is intimidating. It may not be obvious how the techniques used by the researchers really work or what role the new research plays in answering the bigger questions motivating that field, not to mention the obscure jargon! For most people, it takes years for scientific papers to become meaningful.
Our goal is to solve this problem, one paper at a time. In 5 minutes a day reading Astrobites, you should not only learn about one interesting piece of current work, but also get a peek at the broader picture of research in a new area of astronomy.