From NASA Spaceflight: “NG-10 Cygnus departs ISS after 3 month science, supply mission”

NASA Spaceflight

From NASA Spaceflight

2
Three months after its arrival at the International Space Station, the NG-10 Cygnus, named S.S. John Young, has departed the Station with it 5,500 lb (2,494 kg) of trash and disposable equipment.

For the NG-10 S.S. John Young, Station crew spent the last few weeks packing the spacecraft with supplies and trash no longer needed aboard the outpost before closing Cygnus’ forward hatch and the corresponding port aboard the Station.

See Also

NG-10 Mission LIVE Updates
NGIS Section
L2 Antares/Cygnus Special
Click here to Join L2

As part of departure operations, ISS Flight Engineers Anne McClain (NASA) and David Saint-Jacques (Canadian Space Agency), entered the Cupola workstation on the end of Tranquility (Node-3) and used Canadarm2, the Station’s robotic arm, to grapple Cygnus prior to ground controllers sending commands to unbolt the spacecraft from its berth on the Unity (Node-1) module.

McClain and Saint-Jacque then maneuvered the S.S. John Young to its departure attitude and location 10 meters from the ISS.

After a series of readiness checks from NASA Mission Control Houston (MCC-H) and Northrop Grumman Mission Control Dulles (MCC-D), a “go” to release the spacecraft was given.

McClain and Saint-Jacques then sent commands to Canadarm2’s Latching End Effector (the arm’s hand) snares to release Cygnus; they then backed the arm away from the spacecraft before Cygnus pulsed its maneuvering thrusters to begin departure from the Station.

Cygnus will fly a straight-line trajectory under the careful watch of MCC-H, MCC-D, as well as McClain and Saint-Jacques, heading directly away from the International Space Station.

Once Cygnus passes outside the 200 meter Keep Out Sphere (KOS) surrounding the Station, MCC-H and the Station astronauts will pass complete control of the S.S. John Young to Northrop Grumman in Dulles.

3
Regions around the International Space Station. (Credit: NASA)

As is customary with Cygnus missions, the craft’s departure from the Station does not signal the end of its flight, merely the completion of its primary objective and commencement of its secondary mission.

After leaving ISS, Northrop Grumman controllers will fire Cygnus’ engine to raise the craft’s orbital altitude above that of the Station’s.

In this higher orbit, Cygnus will deploy two CubeSats for NanoRacks: MySat-1 and CHEFSat.

MySat-1 is the first NanoRacks payload launched for the United Arab Emirates and is a joint program from Yahsat, Khalifa University of Science and Technology and Northrop Grumman.

MySat-1 is an educational satellite to help students learn how to build durable satellites with skills that can be upscaled to larger, scientific probes.

Joining MySat-1 in the high orbit deployment is CHEFSat from NASA. According to NASA, CHEFSat (Cost-effective High E-Frequency Satellite) will test consumer communications technology for use in space by flying a consumer-grade radio frequency device with the goal of preparing a low cost and readily available technology for mission use.

Once #CHEFSat & #MySat1 are deployed above #ISS altitude, #Cygnus will travel well below @Space_Station to deploy #KickSat2, a #CubeSat from @NASAAmes & @Stanford. #KickSat2 will release small #ChipSats, tiny spacecraft on circuit boards, which will burn up after a few days #NG10 pic.twitter.com/N2bwHmB5h7

— NanoRacks (@NanoRacks) November 16, 2018

After those two deployments, Cygnus will lower its orbit below that of the Station’s. From this lower altitude, a third CubeSat, known as KickSat2 – itself carrying 100 ChipSats – will be deployed.

According to NanoRacks, each ChipSat (a NASA Ames and Stanford University partnership) includes a power, sensor, and communication system on a printed circuit board that measures 3.5 by 3.5 cm, with a thickness of a few millimeters and a mass of less than 3.5 ounces.

Released below the Station’s orbital altitude, the ChipSats will burn up harmlessly in Earth’s atmosphere within a few days of their release from Cygnus.

The CubeSat element of Cygnus’ mission is designed to foster commercial activity and growth within the space sector while also enabling low-cost testing of new technologies that may one day become staples of space exploration.

Previous post-ISS Cygnus activities have included such demonstrations, most notably the SAFFIRE series of experiments that tested fire suppression technology and fire-resistant materials for NASA’s upcoming Orion spacecraft.

After releasing its CubeSat passengers, Cygnus will maneuver for its deorbit burn, currently scheduled for Monday, 25 February 2019. As with all previous Cygnus missions, the re-entry will be a destructive one, with the S.S. John Young burning up harmlessly over the southern Pacific Ocean.

See the full article here .

five-ways-keep-your-child-safe-school-shootings

Please help promote STEM in your local schools.

Stem Education Coalition

NASA Spaceflight , now in its eighth year of operations, is already the leading online news resource for everyone interested in space flight specific news, supplying our readership with the latest news, around the clock, with editors covering all the leading space faring nations.

Breaking more exclusive space flight related news stories than any other site in its field, NASASpaceFlight.com is dedicated to expanding the public’s awareness and respect for the space flight industry, which in turn is reflected in the many thousands of space industry visitors to the site, ranging from NASA to Lockheed Martin, Boeing, United Space Alliance and commercial space flight arena.

With a monthly readership of 500,000 visitors and growing, the site’s expansion has already seen articles being referenced and linked by major news networks such as MSNBC, CBS, The New York Times, Popular Science, but to name a few.

Advertisements