From U Michigan: “‘Magic’ alloy could spur the next generation of solar cells”

U Michigan bloc

University of Michigan

June 15, 2017 [Why so long to get into social media]
Gabe Cherry

1
Jordan Occena, a U-M graduate researcher and Sunyeol Jeon, a former U-M graduate student researcher, calibrate the molecular-beam epitaxy apparatus in the Carl A. Gerstacker Building on August 3, 2015. The apparatus is used for spray painting the “magic” chemical cocktail onto blank gallium arsenide wafers. PHOTO: Joseph Xu, Michigan Engineering.

In what could be a major step forward for a new generation of solar cells called “concentrator photovoltaics,” a team of University of Michigan researchers has developed a new semiconductor alloy that can capture the near-infrared light located on the leading edge of the visible light spectrum.

Easier to manufacture and at least 25 percent less costly than previous formulations, it’s believed to be the world’s most cost-effective material that can capture near-infrared light and is compatible with the gallium arsenide semiconductors often used in concentrator photovoltaics.

Concentrator photovoltaics gather and focus sunlight onto small, high-efficiency solar cells made of gallium arsenide or germanium semiconductors. They’re on track to achieve efficiency rates over 50 percent, while conventional flat-panel silicon solar cells top out in the mid 20s.

2
Jordan Occena, a U-M graduate researcher and Sunyeol Jeon, a former U-M graduate student researcher, calibrate the molecular-beam epitaxy apparatus in the Carl A. Gerstacker Building on August 3, 2015. The apparatus is used for spray painting the “magic” chemical cocktail onto blank gallium arsenide wafers. PHOTO: Joseph Xu, Michigan Engineering.

“Flat-panel silicon is basically maxed out in terms of efficiency,” said Rachel S. Goldman, a U-M materials science and engineering professor whose lab developed the alloy. “The cost of silicon isn’t going down and efficiency isn’t going up. Concentrator photovoltaics could power the next generation.”

Varieties of concentrator photovoltaics exist today. They are made of three different semiconductor alloys layered together. Sprayed onto a semiconductor wafer in a process called molecular-beam epitaxy—a bit like spray painting with individual elements—each layer is only a few microns thick. The layers capture different parts of the solar spectrum; light that gets through one layer is captured by the next.

But near-infrared light slips through these cells unharnessed. For years, researchers have been working toward an elusive “fourth layer” alloy that could be sandwiched into cells to capture this light. It’s a tall order; the alloy must be cost-effective, stable, durable and sensitive to infrared light, with an atomic structure that matches the other three layers in the solar cell.

Getting all those variables right isn’t easy, and until now, researchers have been stuck with prohibitively expensive formulas that use five elements or more.

3
The inside of the main concourse of the molecular beam epitaxy apparatus in the Carl A. Gerstacker Building on August 3, 2015. A blank gallium arsenide wafer is placed in this concourse and moves down the tunnel to a growth chamber where the “magic” chemical cocktail is sprayed on. PHOTO: Joseph Xu, Michigan Engineering.

To find a simpler mix, Goldman’s team devised a novel approach for keeping tabs on the many variables in the process. They combined on-the-ground measurement methods including X-ray diffraction done at U-M and ion beam analysis done at Los Alamos National Laboratory with custom-built computer modeling.

Using this method, they discovered that a slightly different type of arsenic molecule would pair more effectively with the bismuth. They were able to tweak the amount of nitrogen and bismuth in the mix, enabling them to eliminate an additional manufacturing step that previous formulas required. And they found precisely the right temperature that would enable the elements to mix smoothly and stick to the substrate securely.

“‘Magic’ is not a word we use often as materials scientists,” Goldman said. “But that’s what it felt like when we finally got it right.”

4
A plate of semiconductors made by the molecular beam epitaxy apparatus in the Carl A. Gerstacker Building on August 3, 2015. PHOTO: Joseph Xu, Michigan Engineering.

The advance comes on the heels of another innovation from Goldman’s lab that simplifies the “doping” process used to tweak the electrical properties of the chemical layers in gallium arsenide semiconductors. During doping, manufacturers apply a mix of chemicals called “designer impurities” to change how semiconductors conduct electricity and give them positive and negative polarity similar to the electrodes of a battery. The doping agents usually used for gallium arsenide semiconductors are silicon on the negative side and beryllium on the positive side.

The beryllium is a problem—it’s toxic and it costs about ten times more than silicon dopants. Beryllium is also sensitive to heat, which limits flexibility during the manufacturing process. But the U-M team discovered that by reducing the amount of arsenic below levels that were previously considered acceptable, they can “flip” the polarity of silicon dopants, enabling them to use the cheaper, safer element for both the positive and negative sides.

“Being able to change the polarity of the carrier is kind of like atomic ‘ambidexterity’,” said Richard L. Field, a former U-M PhD student who worked on the project. “Just like people with naturally born ambidexterity, it’s fairly uncommon to find atomic impurities with this ability.”

Together, the improved doping process and the new alloy could make the semiconductors used in concentrator photovoltaics as much as 30 percent cheaper to produce, a big step toward making the high-efficiency cells practical for large-scale electricity generation.

“Essentially, this enables us to make these semiconductors with fewer atomic spray cans, and each can is significantly less expensive,” Goldman said. “In the manufacturing world, that kind of simplification is very significant. These new alloys and dopants are also more stable, which gives makers more flexibility as the semiconductors move through the manufacturing process.”

The new alloy is detailed in a paper titled Bi-enhanced N incorporation in GaAsNBi alloys, published June 15 in Applied Physics Letters. The research is supported by the National Science Foundation (grant number DMR 1410282) and the U.S. Department of Energy Office of Science Graduate Student Research.

The doping advances are detailed in a paper titled Influence of surface reconstruction on dopant incorporation and transport properties of GaAs(Bi) alloys. It was published in the December 26, 2016 issue of Applied Physics Letters. The research was supported by the National Science Foundation (grant number DMR 1410282).

See the full article here .

Please help promote STEM in your local schools.

STEM Icon

Stem Education Coalition

U MIchigan Campus

The University of Michigan (U-M, UM, UMich, or U of M), frequently referred to simply as Michigan, is a public research university located in Ann Arbor, Michigan, United States. Originally, founded in 1817 in Detroit as the Catholepistemiad, or University of Michigania, 20 years before the Michigan Territory officially became a state, the University of Michigan is the state’s oldest university. The university moved to Ann Arbor in 1837 onto 40 acres (16 ha) of what is now known as Central Campus. Since its establishment in Ann Arbor, the university campus has expanded to include more than 584 major buildings with a combined area of more than 34 million gross square feet (781 acres or 3.16 km²), and has two satellite campuses located in Flint and Dearborn. The University was one of the founding members of the Association of American Universities.

Considered one of the foremost research universities in the United States,[7] the university has very high research activity and its comprehensive graduate program offers doctoral degrees in the humanities, social sciences, and STEM fields (Science, Technology, Engineering and Mathematics) as well as professional degrees in business, medicine, law, pharmacy, nursing, social work and dentistry. Michigan’s body of living alumni (as of 2012) comprises more than 500,000. Besides academic life, Michigan’s athletic teams compete in Division I of the NCAA and are collectively known as the Wolverines. They are members of the Big Ten Conference.

Advertisements