From LC Newsline: “Calorimeters enjoy beam time”

Linear Collider Collaboration header
Linear Collider Collaboration

16 October 2014
Barbara Warmbein

There are prototypes and there are prototypes. Some are needed to verify that a chosen detection technology actually works, some help scientists test one technology against another, some help them design sturdy detector infrastructure with little material budget, working power supply and cooling, while others set out to prove that it is possible to have full detector functionality with all electronics set up like in the final detector. And then there are those that do it all at the same time.

CALICE crowd around detector setup in the T9 beamline at CERN. All images by Katsushige Kotera

The CALICE collaboration’s analogue hadronic calorimeter, or AHCAL, is an example of the last type. It is a prototype for a calorimeter – a subdetector that measures the energies of passing particles – that might one day be part of the ILD detector. It would work together with trackers, electromagnetic calorimeter and muon system to record, reconstruct, track and identify every particle produced in the collisions at the future ILC. The CALICE scientists are currently testing a prototype that takes a close look at detector infrastructure like cooling and power supply while at the same time comparing different kinds of silicon photomultipliers or SiPMs. These do the actual job of detection, and the collaboration is testing the latest and much advanced commercial silicon photomultipliers (SiPMs) from Russia, Ireland, Japan and Germany.

Flying detectors: after craning the hadronic calorimeter into its test beam destination…
…it gets installed and set up before starting its data taking run.

The HCAL prototype consists of one module, which corresponds to a slice of one sector of the future calorimeter barrel of the final detector. It has 1000 channels per square metre and it shares the space in the test beam area with CALICE electromagnetic calorimeter prototype modules from Japan – a true collaboration that also shares the same readout electronics. It’s also the first time that these calorimeters are taking data in a hadron beam after a few runs in electron beams at DESY in Germany.

…it gets installed and set up before starting its data taking run.

See the full article here.

The Linear Collider Collaboration is an organisation that brings the two most likely candidates, the Compact Linear Collider Study (CLIC) and the International Liner Collider (ILC), together under one roof. Headed by former LHC Project Manager Lyn Evans, it strives to coordinate the research and development work that is being done for accelerators and detectors around the world and to take the project linear collider to the next step: a decision that it will be built, and where.

Some 2000 scientists – particle physicists, accelerator physicists, engineers – are involved in the ILC or in CLIC, and often in both projects. They work on state-of-the-art detector technologies, new acceleration techniques, the civil engineering aspect of building a straight tunnel of at least 30 kilometres in length, a reliable cost estimate and many more aspects that projects of this scale require. The Linear Collider Collaboration ensures that synergies between the two friendly competitors are used to the maximum.

Linear Collider Colaboration Banner

ScienceSprings relies on technology from

MAINGEAR computers